Compact thermometer with penetration probe Hanna Checktemp
ref: 15VAHI98501
sku: HI98501
- Compact thermometer with penetration probe
- Manufacturer: Hanna
- Code: HI98501
- Automatic temperature check function Calcheck
- Probe protector included
- Range: -50.0 to 150 ºC
- Easy to use: one button
€50.25
Free shipping
Technical characteristics
Compact thermometer with penetration probe Hanna Checktemp
This is the most popular thermometer used in the food industry, laboratories and production processes where a good product, quality and accuracy go hand in hand. The HI98501 provides in seconds the temperature in a range from -50ºC to 150ºC, on a large liquid crystal display, with an accuracy of ± 0.3ºC and without reading difficulties. It has a built-in calibration check device.
The Checktemp HI98501 thermometer is highly accurate in temperature measurements over a wide range without having to worry about leakage or condensation. Its design has been improved to offer greater robustness, improved waterproofing, improved ergonomics and easier viewing due to its display system that prevents loss of readings depending on the viewing angle.
The sharp tip of the probe facilitates the penetration in the different temperature control routines in semi-solid products allowing practicality and speed in incoming and outgoing goods controls.
The Checktemp is the ideal instrument for temperature measurements according to HACCP requirements.
The main improvements are:
- IP65 waterproof
- Accuracy: +/-0.2ºC in the range between -30-120ºC
- Cal Check, automatic one point check - 0,0 -
- Compliance with UNE EN13485
- Large display
- Auto off function for energy saving, programmable from 8 to 60 minutes
Technical table
| Range | 0.00 to 2.50 ppm |
| Resolution | 0.01 ppm |
| Accuracy at 25ºC | ±0.03 ppm ±3% of reading |
| Light source | LED at 525 nm |
| Light detector | silicon photocell |
| Method | adaptation of USEPA 330.5 and Standard Method 4500-Cl-G |
| Environment | 0 to 50ºC; RH max. 95% non-condensing |
| Battery type | (1) 1.5V AAA |
| Automatic shutdown | after two minutes of non-use |
| Dimensions | 81,5 x 61 x 37,5 mm |
| Weight | 64 g |
Hanna Checker Plus pH Tester
The HI98100 Checker Plus is the next generation of the popular pH checkers from Hanna. The Checker is by far one of the most popular pH meters in the world, with over 1 million users using it since its introduction in 1991.
From students to researchers, it has helped everyone with their pH measurements because of its ease of use and operability.
The HI98100 Checker Plus pH tester features many advances, yet retains the look and feel of the original checker.
The Checker Plus offers automatic single or two-point calibration, automatic buffer recognition, buffer calibration labels, stability indicator, low battery indicator, and selectable automatic shut-off.
The Checker Plus retains the iconic original pentagon design, with a 103 mm long measuring probe that tapers to a diameter of 8 mm, making it ideal for measurements in test tubes and flasks.
Included in the kit
- Checker HI701
- Checker HI98103
- 2 measuring cuvettes with lid
- Liquid free chlorine reagent (100 test)
- Calibration solutions pH4 and pH7
- Storage solution
- Batteries
- Carrying case
Technical table
| Range | 0.00 - 14.00 |
| Resolution | 0.01 |
| Accuracy | +/- 0.2 |
| Electrode | HI1271 |
| Battery | CR2032 Li-ion |
Data Sheet
- Parameters
- 1 parameter
- Type of case
- Digital
Expert Review
Termómetro compacto con sonda de penetración
Termómetro de pincho Hanna cumplimiento con UNE EN13485 y UNE EN ISO 17381.
Might Also like
Last Viewed products
- -€119.00
