Injected pool filter QP Rubi 300
ref: 06FI560060
ean13: 8410189024483
sku: 560060
- Pool Filter
- Manufacturer: Productos QP
- Code: 560060
- Diameter: 300 mm
- Material: high density injected polypropylene
- Includes 6-way selector valve of 1" 1/2
- Includes pressure gauge, drain plug and ABS cap
- Stabilising base
€215.00
Free shipping
Technical characteristics
QP Rubí 300 filter for swimming pool purifier
The QP Ruby filter is injected in high-density polypropylene for greater resistance over time.
It includes all the elements for the correct operation of the filtration system. It incorporates a pressure gauge at the top. In the lower part it has a drain plug and a stabilising base.
MAIN CHARACTERISTICS
- Diameter: 300 mm
- Filtration capacity: 4,000 l/h
- Filtration speed: 50 m3/h
- Maximum working pressure: 2,5 kg/cm2
- Sand load: 30 kg
- Glass load: 24 kg
- Crepins: 8 of 70 mm
Screw-on top cover
6-way selector valve 1" 1/2
Pressure gauge
Product manufactured at España
what is leakage?
Filtration is one of the most important tasks when cleaning and disinfecting our pool.
Within the filtration system, the most important element is the filter, as it is responsible for retaining the dirt particles in its filter bed, whether sand or glass, as the water circulates through it, to subsequently return the water to the pool crystal clear and suitable for swimming.
When selecting the ideal filter for our pool, several aspects must be taken into account, such as the size of the pool and the power of the pump that will accompany the filter.
In this way, we will be able to optimise the performance of our filtration system to the maximum and enjoy crystal clear water that is suitable for swimming.
Commissioning
Once the sand filter has been filled (see manual), proceed as follows:
1. Open the valves on the suction pipes leading to the pool (skimmer and drain).
2. Turn the selector valve to the RINSE position.
3. Switch on the pump for 5 minutes.
4. Stop the pump and switch the selector valve to the RINSE position.
5. Reconnect the pump for 1 minute.
6. Stop the pump and switch the selector valve to the FILTRATION position.
The filter is now ready for operation.
Functions of the selector valve
Data Sheet
- Recommended pool size
- 0-20 m3
- Filter diameter
- 300 mm
- For pumps
- 0.2 HP - 0.33 HP
- Valve
- 1 1/2" side
- Sand load (kg)
- 0 - 50 kg
- Type of filtration
- Sand
Last Viewed products
