10 HP centrifugal pump for swimming pool

Centrifugal pump 10 HP

Centrifugal pump with high flow rate in cast iron, which has a pre-filter incorporated in the suction, making it the ideal pump for large filtration equipment.

Pump body, support, pre-filter, coupling and turbine in cast iron, pre-treated with epoxy-polyester paint and oven-dried to make it more resistant to oxidation.

• Stainless steel shaft and pre-filter basket.
• Mechanical seal in carbon-ceramic.
• Standard asynchronous motor, closed with external ventilation.
• Degree of protection IP-54.
• 2.850 rpm. 50 Hz.
• Suction diameter: DN125*.
• Discharge diameter: DN100.

Maintenance:

The maintenance of these pumps is easy and simple, as the construction of the pump, which incorporates a fully standardised motor, allows the motor to be changed or repaired without the need to empty the installation or dismantle any part of the hydraulic part of the pump, even if there are no shut-off valves at the inlet and outlet

• STANDARD VOLTAGE: UP TO 5,5 HP 220-380.
• VOLT. FROM 7,5 HP 380-660 VOLT.