Net-N-Clean reduction tube

Reduction tube

Tube with the adjusted inner diameter to be able to glue the nozzle of the Net'N'Clean 26985. Made of white PVC.
Rear connection Ø 50 mm inside and Ø 63 mm outside.
It is only used in the case of the nozzle with ball joint in an in-ground pool.
This special PVC tube is glued in the place where the nozzle with ball joint will be placed and once the gresite has been laid in the pool it is cut to the height of the latter.
This makes the installation as easy as possible as it is not necessary to foresee before gunning the pool at what height the nozzle housings have to be.

what is NET'N'CLEAN?

The Net'n'Clean system consists of a series of nozzles that are installed on the bottom of the pool - depending on the size and shape of the pool there will be more or less nozzles - as well as one or more distribution valves that direct the pressurised water through each branch of nozzles sequentially.
The water comes out at full pressure through the nozzles and causes the dirt from the bottom to rise to the surface of the pool where it is collected by the filtration system (skimmer or overflow).

where can NET'N'CLEAN be installed?

In any type of newly built pool.
There are two basic models of Net'n'Clean nozzles in various versions: a model for installation in in-ground pools (concrete with gresite etc.) and a model for liner pools (prefabricated or panel pools with a concrete floor). They are normally installed when the pool is built.

what does the user have to do?

The operation of Net'n'Clean is very simple for the pool user: he does not have to worry about anything at all. If the construction and installation design is correct, the system will carry out the cleaning work without the owner or user noticing.
You will completely forget the problems that cleaning your pool used to cause.

what are the advantages?

The integrated Net'n'Clean system, apart from completely cleaning your pool, whatever its shape or use, also allows the chemical products to act more effectively, thanks to their better distribution in the water. In the same way, heating costs are reduced, as the heated water can be introduced through the lower nozzles, achieving a more homogeneous distribution of the water temperature. In addition, the sometimes cumbersome installation of automatic pool cleaners is eliminated.
In a word: With the minimum energy and therefore the minimum cost, the integrated Net'n'Clean system completely cleans all types of
pools.