Anti-algae CTX 500C Algastop Power in 1 lt

Anti-algae CTX 500C Algastop Power

Fast-acting compound with a high bactericidal, algaecidal and fungicidal power, designed to prevent the formation and development of algae in the pool water.

Prevention is the best solution.

• Ideal for all types of pools.
• Concentrated maintenance product which, thanks to its high efficacy, will allow you to keep your pool free of algae of all kinds.
• Concentrated product: 13 weeks (0.5 L) / 25 weeks (1 L)

Recommendations for use

1. Initial dosage: Add 200 ml per 50 m3.
2. Subsequently add 40 ml per 50 m3 once a week.

Highlights of the Superconcentrated range

• 70% savings in storage and transport space - Reduction of product volume thanks to its high concentration
• Control of application and minimisation of waste management costs.
• Precise control of the product used (dosing cap) - Reduction of the cost of waste management (waste management costs)
• Reduction of waste management costs (ecoembes) - Environmentally friendly
• Environmentally friendly - Highly concentrated product - Reduced use of raw materials, packaging and energy in its production - 50% savings in CO2 emissions in its transport

Dosage and instructions for use

Initial Treatment: Add 160 ml. of product per 50 m.3 of water.

The Initial Treatment can be repeated whenever there is a lack of transparency in the water.

Maintenance Treatment: Add 40 ml. of product per 50 m.3 of water once a week.

These doses are for guidance only, and can be modified depending on the characteristics of each pool, climate, etc...

Pour the required dose of product into a container with water and spread the solution evenly over the surface of the pool. The addition of the product should preferably be done at dusk and without the presence of bathers in the pool water.

- Periodic disinfection of the pool basin:

Before refilling the pool, it is recommended to impregnate the walls and bottom with a solution of the product (160 ml. of the product in 10 lts. of water), thus forming a protective film with a disinfectant action.

- Disinfection of the pool environment:

The surfaces around the pool can become slippery and can be a vehicle for the transmission of diseases. To avoid these problems, we recommend applying a daily solution of the product (960 ml. of the product in 10 lts. of water) using a sprayer or watering can. After one hour, these surfaces should be rinsed with plenty of water.

HAZARD IDENTIFICATION

Classification of the mixture.

According to Regulation (EU) No 1272/2008:

• Skin Irrit. 2 : Causes skin irritation.
• Eye Irrit. 2 : Causes serious eye irritation.

Label elements.

Labelling according to Regulation (EU) No 1272/2008:

Pictograms:

Warning word:

Caution

H-phrases:

• H315 Causes skin irritation.
• H319 Causes serious eye irritation.
• H400 Very toxic to aquatic organisms.

P-phrases:

• P102 Keep out of reach of children
• P280 Wear protective gloves / clothing / goggles / mask.
• P273 Avoid release to the environment.
• P264 Wash hands thoroughly after handling.
• P501 Dispose of contents and/or container as hazardous waste by handing it over to your local collection point.

Contains:

• Quaternary ammonium compounds, benzyl-C12-16-alkyldimethyl, chlorides

Other hazards.

Under normal conditions of use and in its original form, the product has no other adverse effects on health and the environment.

Emergency telephone number:

Servicio de Información Toxicológica (National Institute of Toxicology and Forensic Sciences) Telephone: +34 91 5620420. Information in Spanish (24h/365 days). Only for the purpose of providing health response in case of emergency.