Hydrospin pre-filter

Hydrospin Pre-filter

Hydrocyclonic cleaning pre-filter that can be installed in filtration systems in both new and existing installations. It can treat flow rates of up to 30 ^m3/h with a maximum working pressure of 2.5 bar. It is installed between the pump and the filter, separating solids of up to 40 microns in such a way as to halve the consumption of water for flushing the filtration system. The HydroSpin has a solids collection tank with 3 distinct zones (settling, clarification and thickening). It can be cleaned with only 5 litres of water without stopping the pump.

Save 50% on water when backwashing your filter Hydrocyclonic pre-filter cleaner that can be installed in both new and existing filtration systems.

Features

• Significant reduction in filter backwashing operations.
• Low pressure drop allowing installation without the need to change the existing pump.
• Can be installed on the floor with the supplied fittings or on the wall with DN300 flanges.
• Standard connections Ø63mm for water inlet and outlet and Ø32mm for dirt evacuation.
• To install it on the wall, the Kit code 06FI47158 must be previously purchased.