Hydraulic pool lifter PK 150 kgs

General characteristics of the PK portable hydraulic lift for swimming pools

• Approved for lifting 150 kg.
• To operate, a water supply with pressure of 3.5 bar is required. 5.5 bar is needed to lift 150 kg.
• Turning angle: 170º, clockwise (downwards).
• Turning radius 700 m/m.
• The control knob is located to the right of the user (if the opposite rotation is required, please specify it when ordering)
• The seat has a travel of 1.06 m. Removable seat.

Operational Data of the PK portable hydraulic pool lifter

• Net weight: 37 Kg
• Packed weight: 45 kg
• Climbing time empty: 24
• Climbing time with 85 kg load: 27"
• Lowering time empty: 50
• Lowering time with 85 kg of load: 22"
• Water capacity in piston: 9 litres

Pre-installation and Installation:

The following points should be considered when choosing the location site:

• Easy accessibility for the user.
• It should not be in a place where other bathers pass through or park.
• The water intake should be as close as possible.
• We recommend placing the lift where the water depth is approximately 1.20/1.30 metres, so that if the user of the lift needs help, the person accompanying him/her can stand up safely.
• In the place where it has been decided to place the lift, a water supply of ½ inch and 3.5 bar must be provided. If the network does not have this pressure, a pressure group should be installed.

If the pool is already built, it is advisable to install the water inlet after the lift has been installed.

• Installation is very simple.
• It only has anchors on the outside of the pool.

Adjust the height of the seat and connect the hose to the water intake.